Neptune DOS: Dosing & Fluid Metering System
Regular price
$659.00
$659.00
Sale
The DŌS is a multi-purpose Dosing and Fluid Metering System. The DŌS connects to any Apex via its AquaBus connection. The true versatility and functionality of the DŌS comes to life via the software wizards built into Apex Fusion. This takes dosing to a whole new level in terms of ease of use as well as functionality when compared to standalone dosing systems because the DŌS is part of your Apex ecosystem. Not only can you integrate it into other operations and devices you have configured, but we also will be continuing to expand on its capabilities as time goes on via software updates to Apex Fusion.
So here's what the DŌS can do:
2-Part Dosing Made Easy
The #1 reason people purchase a dosing system for their aquariums is for consistent and easy dosing of 2-part solutions (calcium and alkalinity) to their reef tanks. The most common method for doing this today is to use standalone dosing pumps and run them on a timer using seconds or minutes to determine how much to dose. This is not only confusing, but also prone to inaccuracy. Everyone knows that when measuring a fluid it is done by volume, not time. Every dosing calculators out there uses volume. So, with the DŌS (and the Apex Fusion interface) you simply enter the amount you want of each part of the additives (one on each pump) and what hours of the day you want it delivered. The DŌS then sets up all the dosing intervals within that time period. When that time interval is finished, the exact volume you set has been delivered. It even automatically chooses the slowest speed necessary for the pump so that it minimizes noise.
The DŌS wizards in Apex Fusion take 2-part dosing to the next level by integrating a feedback loop from your water testing to make suggestions to fine tune the amount you dose each day. Simply put in your tank size and after a few days of entering testing results, it will help you refine your dosing amounts for the demand of your particular aquarium. No more guessing. No more fooling with the timings.
Automated Water Changes
Water changes with the DŌS are super easy. All you do is place your empty vessel and your fresh stock of saltwater under your stand. Then, with the Apex Fusion wizard just tell it an amount of water you want to change over what length of time and the hours of the day you want it to happen and it figures it all out for you. It will perform an automatic, continuous water change for you. It gets better. If you have our dual optical water sensing accessory Apex Fusion will send you an email or text message letting you know it is time to change out the jugs. Less time pumping, siphoning, and sloshing water and more time enjoying a great aquarium.
Micro-Dosing of Elements
If you need to dose tiny amounts of a particular solution, element or other fluid (like vodka dosing or ZEOvit systems), the DŌS is the perfect solution due to its precision controlled stepper motor. This ability to control pump movement in such a refined manner means that you can dose all the way down to 0.1ml at a time!
Large Diameter Tubing
Larger size tubing means that your pump does not have to work nearly as hard – or stay on for longer cycles. The most popular dosing pumps on the market use tube fittings with the tiny diameter of 1.67mm. The DŌS uses much larger tubing and fittings. In fact, at 3.33mm in diameter, the pump on the DŌS can handle 4x the flow of the most common pump style on the market. This means that your pump (and motor) will run 1/4 the time to pump the same amount of fluid. Less run time means long pump life.
Super Silent Operation
The Neptune Systems engineering team has taken extensive steps both in how the pump operates as well as the enclosure design to ensure that the DŌS system is one of the quietest dosing systems on the market for the fluid volumes it delivers.
Included Items
DŌS Pump
Aquabus Cable
Power Supply
4 Meters DŌS Tubing
Specifications
Size (Approx): 24cm x 13cm x 13cm
Weight (Approx): 2 kgs
Lift Height: 24 feet (7 metres) - minimum at MSL
Suction Height: 24 feet (7 metres)
Flow Rate: Variable (0.1mL – 250mL/min)
Power Requirement: 220/24oV
So here's what the DŌS can do:
2-Part Dosing Made Easy
The #1 reason people purchase a dosing system for their aquariums is for consistent and easy dosing of 2-part solutions (calcium and alkalinity) to their reef tanks. The most common method for doing this today is to use standalone dosing pumps and run them on a timer using seconds or minutes to determine how much to dose. This is not only confusing, but also prone to inaccuracy. Everyone knows that when measuring a fluid it is done by volume, not time. Every dosing calculators out there uses volume. So, with the DŌS (and the Apex Fusion interface) you simply enter the amount you want of each part of the additives (one on each pump) and what hours of the day you want it delivered. The DŌS then sets up all the dosing intervals within that time period. When that time interval is finished, the exact volume you set has been delivered. It even automatically chooses the slowest speed necessary for the pump so that it minimizes noise.
The DŌS wizards in Apex Fusion take 2-part dosing to the next level by integrating a feedback loop from your water testing to make suggestions to fine tune the amount you dose each day. Simply put in your tank size and after a few days of entering testing results, it will help you refine your dosing amounts for the demand of your particular aquarium. No more guessing. No more fooling with the timings.
Automated Water Changes
Water changes with the DŌS are super easy. All you do is place your empty vessel and your fresh stock of saltwater under your stand. Then, with the Apex Fusion wizard just tell it an amount of water you want to change over what length of time and the hours of the day you want it to happen and it figures it all out for you. It will perform an automatic, continuous water change for you. It gets better. If you have our dual optical water sensing accessory Apex Fusion will send you an email or text message letting you know it is time to change out the jugs. Less time pumping, siphoning, and sloshing water and more time enjoying a great aquarium.
Micro-Dosing of Elements
If you need to dose tiny amounts of a particular solution, element or other fluid (like vodka dosing or ZEOvit systems), the DŌS is the perfect solution due to its precision controlled stepper motor. This ability to control pump movement in such a refined manner means that you can dose all the way down to 0.1ml at a time!
Large Diameter Tubing
Larger size tubing means that your pump does not have to work nearly as hard – or stay on for longer cycles. The most popular dosing pumps on the market use tube fittings with the tiny diameter of 1.67mm. The DŌS uses much larger tubing and fittings. In fact, at 3.33mm in diameter, the pump on the DŌS can handle 4x the flow of the most common pump style on the market. This means that your pump (and motor) will run 1/4 the time to pump the same amount of fluid. Less run time means long pump life.
Super Silent Operation
The Neptune Systems engineering team has taken extensive steps both in how the pump operates as well as the enclosure design to ensure that the DŌS system is one of the quietest dosing systems on the market for the fluid volumes it delivers.
Included Items
DŌS Pump
Aquabus Cable
Power Supply
4 Meters DŌS Tubing
Specifications
Size (Approx): 24cm x 13cm x 13cm
Weight (Approx): 2 kgs
Lift Height: 24 feet (7 metres) - minimum at MSL
Suction Height: 24 feet (7 metres)
Flow Rate: Variable (0.1mL – 250mL/min)
Power Requirement: 220/24oV
Note: Requires Apex NextGen or Apex Classic.
